YTUnity logo

Welcome to YTUnity

One free SpiderTaz Network account works across every network site.

Casting the iRobot Head | Mold Making Project Part 2

BJBEnterprises Video 3 months ago

Description

The mold is finished. Now it’s time to see if all that work paid off.

In Part 2 of our iRobot head project, the BJB technical team takes the completed mold from Part 1 and uses it to create the final clear casting.

We walk through the full casting process, including assembling the mold, installing the vents and funnel, preparing and mixing the material, vacuum degassing to remove trapped air, filling the mold, and placing it under 60 PSI of pressure before allowing it to cure overnight.

Then comes the moment we’ve been waiting for: opening the mold and revealing the finished part.

In this video:

🟣 Preparing and assembling the completed mold
🟣 Installing vents and the fill funnel
🟣 Mixing the casting material
🟣 Vacuum degassing to remove trapped air
🟣 Filling and pressure casting at 60 PSI
🟣 Overnight curing
🟣 Demolding and revealing the finished clear iRobot head

This project is a great example of how mold design, material preparation, venting, degassing, pressure, and patience all work together to produce the final casting.

Missed Part 1? Start there to see how the original iRobot head was prepared and the mold was built from scratch.

Learn more about BJB materials and technical support at bjbmaterials.com.

#SiliconeMolding #resin #moldmaking

Featured creators

Creators on the SpiderTaz Network

Become a creator →