Description
rafting the Bodice (Top)
How to make simple Cutting - Model for Frock || Fashion
Fold your fabric in four layers (so you cut front and back at once).
Shoulder & Armhole: Mark half of your shoulder width. Drop the armhole line by the same amount (e.g., if the shoulder is 7", the armhole depth is 7").
Chest Line: Mark 1/4 of the chest measurement + 1.5" for seams.
Neckline: Standard width is 2.5" to 3". Curve it gently.
3. The Skirt (Bottom)
For a simple frock, the A-line or Gathered skirt is best:
Gathered: Cut a rectangular piece 2 to 3 times the width of the waist.
A-Line: Cut a trapezoid shape where the top matches the bodice waist and the bottom flares out.
4. Key Corrections for a Better Fit
If your previous models felt "off," check these three things:
The Shoulder Slope: Never cut a straight horizontal line for shoulders. Slope it down by 0.5 inches toward the armhole for a natural fit.
Armhole Curve: The front armhole should be curved slightly deeper (about 0.5") than the back armhole to prevent bunching at the chest.
Waist Curve: Curve the bottom of the bodice up by 0.5" at the side seams so the frock doesn't "droop" on the sides.
5. Cutting Sequence
Cut the neckline (start small; you can always go bigger).
Cut the shoulder slope.
Cut the armholes.
Separate front and back to deepen the front neck if desired.
Cut the skirt panel and notch the center points for easy alignment.
Pro Tip: Always use tailor's chalk on the "wrong" side (inside) of the fabric so marks don't show on your finished frock.
@howtomakesimple #howtomakesimple #h2ms