Drilling & Reaming of Wing Attach Fitting in Preparation for Interference Fit Bushing Installation

swampfoot Video 4 years ago

설명

Some excellent t-shirts below:
A-10 - Low Speed, High Drag: http://surl.li/blwdd
F-14 Tomcat - Anytime, Baby!: http://surl.li/blwct
For fans of the 1979 film Alien: https://www.amazon.com/dp/B09TCQ2DGZ
Forbidden Planet's Space Cruiser: https://www.amazon.com/dp/B09TDKV6MG
World's most powerful rocket engine: https://www.amazon.com/dp/B09TGCQN17
The Mars Rover Family: https://www.amazon.com/dp/B09TL694C8
Workers create all wealth: https://www.amazon.com/dp/B09TJGP21H
John Brown, abolitionist: https://www.amazon.com/dp/B09TN7BZ7K

Before installation of the bushing, the wing attach fitting must be correctly sized and finished using a drill and ream pass. During this process, it is necessary to constantly clear the work space of swarf (drill shavings) and maintain drill and ream lubrication. The swarf is razor sharp and must be handled with great care to avoid cutting one's fingers.