Description
Learn how to replace the DJI Lito X1 GPS and IMU module, inspect the ribbon cable, restore satellite signal, and fix calibration or unstable-hovering issues.
Buy tools and parts on AMAZON:
Screwdriver Set: https://hfixt.com/spro
Opening Tool Set: https://hfixt.com/pryt
Magnetic Mat: https://hfixt.com/mat
Tweezers: https://hfixt.com/tzrs
Glue for Electronics: https://amzn.to/4uRo1ei
Glue Gun Kit: https://amzn.to/4993KZz
Hot Glue: https://amzn.to/4nz7R77
Global AliExpress:
Screwdriver Set: https://hfixt.com/alis
Opening Tool Kit: https://hfixt.com/alit
Magnetic Mat: https://hfixt.com/amat
Tweezers set: https://hfixt.com/altz
GPS module: https://s.click.aliexpress.com/e/_c3EsjKyV
Glue for Electronics: https://s.click.aliexpress.com/e/_c3YkCESN
📌*Useful links*
Water Damaged Drone Repair: https://youtu.be/NN5JeRZ-FF4
Best Screwdriver Set: https://youtu.be/fdtNem4rDDM
More DIY repair guides: https://how-fixit.com
📱Follow us for more tech tips and guides!
TikTok: https://www.tiktok.com/@howfixit
Instagram: https://www.instagram.com/howfixit/
Facebook: https://www.facebook.com/HowFixit/
X: https://x.com/HowFixit
*Description*
Is your DJI Lito X1 showing a weak or missing GPS signal, taking too long to find satellites, failing IMU calibration, hovering unstably, or displaying positioning and flight-orientation errors after a crash? This step-by-step repair guide shows how to remove and replace the GPS module with the integrated Inertial Measurement Unit (IMU).
The guide also explains when the ribbon cable should be replaced before the module and what to check during the first power-on test. After reassembly, verify the GPS signal and IMU status in the DJI Fly app, and complete any requested calibration before flying.
This repair may help with slow satellite acquisition, GPS positioning problems, unstable hovering, IMU initialization errors, failed calibration, and takeoff issues.
HowFixit – DIY electronics repair guides.
🎬 Timecodes:
00:00 DJI Lito X1 GPS and IMU problems
00:29 Required repair tools and parts
01:09 Remove the battery and propellers
01:14 Remove the upper-cover screws
01:28 Open the DJI Lito X1 safely
02:36 Avoid damaging the GPS ribbon cable
02:54 Remove the upper cover
03:00 Disconnect the GPS flex cable
03:05 Remove the GPS and IMU module
03:13 GPS and IMU module failure symptoms
03:43 Check the ribbon cable after a crash
03:59 Install the GPS and IMU module
04:49 Reconnect and secure the ribbon cable
05:12 Reinstall the upper cover
06:01 First power-on test
06:15 Final repair recommendations
AFFILIATE PROGRAM
As an Amazon Associate, I earn from qualifying purchases.
#djilitox1 #dji #howfixit #diy #djirepair