Beschrijving
Complete DJI Lito X1 teardown and reassembly guide: replace the gimbal, GPS, IMU, LiDAR, sensors, main board, hinge shafts, and more.
Buy tools and parts on AMAZON:
Screwdriver Set: https://hfixt.com/spro
Opening Tool Set: https://hfixt.com/pryt
Magnetic Mat: https://hfixt.com/mat
Tweezers: https://hfixt.com/tzrs
Glue for Electronics: https://amzn.to/4uRo1ei
Glue Gun Kit: https://amzn.to/4993KZz
Hot Glue: https://amzn.to/4nz7R77
Global AliExpress:
Screwdriver Set: https://hfixt.com/alis
Opening Tool Kit: https://hfixt.com/alit
Magnetic Mat: https://hfixt.com/amat
Tweezers set: https://hfixt.com/altz
Arm Shaft: https://s.click.aliexpress.com/e/_c3fdkyJ7
Body Parts: https://s.click.aliexpress.com/e/_c3o3Oipr
Core Board: https://s.click.aliexpress.com/e/_c2uHhhvT
Vision Sensor: https://s.click.aliexpress.com/e/_c451vrtF
Gimbal: https://s.click.aliexpress.com/e/_c3yFcm1r
Gimbal Cable: https://s.click.aliexpress.com/e/_c4UnVDu1
GPS module: https://s.click.aliexpress.com/e/_c3EsjKyV
Glue for Electronics: https://s.click.aliexpress.com/e/_c3YkCESN
📌*Useful links*
Water Damaged Drone Repair: https://youtu.be/NN5JeRZ-FF4
Best Screwdriver Set: https://youtu.be/fdtNem4rDDM
More DIY repair guides: https://how-fixit.com
📱Follow us for more tech tips and guides!
TikTok: https://www.tiktok.com/@howfixit
Instagram: https://www.instagram.com/howfixit/
Facebook: https://www.facebook.com/HowFixit/
X: https://x.com/HowFixit
*Description*
Learn how to completely disassemble and reassemble the DJI Lito X1 in this full step-by-step drone repair guide. This video shows the complete teardown process for crash damage repair, internal module replacement, and frame inspection.
In this guide, I’ll show how to remove the body shell, gimbal camera assembly, GPS and IMU module, compass module, heatsink, main board, vision sensors, front LiDAR module, vision interface board, lower vision and infrared sensor flex cable, and front and rear arm hinge shafts.
This tutorial can help if your DJI Lito X1 has gimbal stuck errors, gimbal overload, weak GPS signal, failed IMU calibration, compass errors, LiDAR errors, vision sensor problems, unstable hovering, motor or ESC errors, water damage, or broken frame parts after a crash.
You’ll also see the full reassembly process, including how to route flex cables, secure connectors with suitable adhesive, reinstall the heatsink, check thermal paste, install the gimbal correctly, and perform the first power-on test.
HowFixit – DIY electronics repair guides.
🎬Timecodes
00:00 Intro — DJI Lito X1 full repair guide
00:50 Required tools and repair preparation
01:31 Remove battery and propellers
01:35 Remove upper cover
02:58 GPS cable warning
03:22 Disconnect gimbal signal and flex cables
05:06 Remove UV glue from gimbal connectors
07:15 Remove lower cover and downward vision sensor screws
08:30 Remove gimbal camera assembly
09:33 Common gimbal problems after a crash
10:30 Remove GPS and IMU module
11:36 Remove heatsink and inspect thermal paste
12:25 Disconnect cables and remove main board
14:18 Main board symptoms and water damage notes
15:27 Remove compass module
15:56 Remove upper vision sensor
16:50 Remove front LiDAR module
18:00 Remove vision and LiDAR interface board
19:21 Remove downward vision sensor
19:52 Remove lower vision and infrared sensor flex cable
21:33 Remove front arm hinge shaft
22:44 Remove rear arm hinge shaft
23:25 ESC board errors overview
24:01 Full teardown summary
25:02 Reassembly begins
25:09 Install rear arm hinge shaft
26:00 Install front arm hinge shaft
26:57 Install lower vision and infrared flex cable
28:03 Adhesive recommendation for connectors
29:16 Install vision interface board
29:30 Install front LiDAR module
30:00 Install upper vision sensor
31:39 Install compass module
32:16 Install main board and reconnect cables
34:27 Reinstall heatsink and thermal paste
35:57 Install GPS and IMU module
37:30 Install gimbal camera assembly
42:58 Secure ESC board
43:50 Install lower cover
44:30 Install upper cover
45:20 First power-on test and calibration
🌟FAQ:
❓Question: Why does my DJI Lito X1 show gimbal stuck or gimbal overload errors?
✔️Answer: These errors can be caused by crash damage, damaged gimbal cables, a cracked bracket, motor failure, shifted gimbal axis, or a deformed frame.
❓Question: What adhesive should I use for drone connectors?
✔️Answer: Electronics-grade neutral-cure RTV silicone is recommended because it stays flexible and helps protect connectors from vibration. Hot glue can be used as an alternative.
❓Question: Do I need to calibrate the drone after repair?
✔️Answer: Yes, if the app requests calibration, complete the required gimbal, IMU, compass, LiDAR, or vision sensor calibration before the first flight.
AFFILIATE PROGRAM
As an Amazon Associate, I earn from qualifying purchases.
#djilitox1 #djilito1 #howfixit #dronerepair #djirepair