Description
Chain wax vs. chain lube: which one actually keeps your drivetrain clean, fast, and durable? Do you clean your chain before using the chain lubricant of your choice?
In Part 1 of my discussion, Adam @ZeroFrictionCycling joins the channel to break down 10+ years and 700,000 kilometers of independent lab testing data behind hot-melt immersive waxing, wax-based drip lubes, and conventional chain lubricants.
We look at real-world wear rates, we explain why traditional wet lubes turn into liquid sandpaper—and how switching to an immersive hot melt wax can optimize your drivetrain efficiency, help you save watts, and save you hundreds of dollars in parts wear.
Whether you ride mountain, gravel, or road, this is an honest, relaxed chat cutting through the marketing noise so you stop burning through expensive cassettes and chains.
▶What we cover in Part 1:
• Hot-melt wax vs. wax drip lubes vs. standard oil lubes
• Why conventional lubricants turn into grinding paste on the trail
• Factory chain grease: strip it or ride it?
• Lab wear data, watt losses, and drivetrain longevity
• Which setup makes the most sense for wet, dusty, or muddy conditions
Part 2 drops next week! Make sure to subscribe to LoveMTB so you don’t miss the follow-up covering prep steps, application methods, and deep-dive maintenance routines.
Drop it in the comments below for our Part 2 Q&A! 👇
🔔 Subscribe for weekly no-BS bike tech & reviews → https://bit.ly/37tescF
📲 IG: instagram.com/love.mtb | X: twitter.com/mevnet
👕 T-Shirts & Merch: https://lovemtb.dashery.com/
🔗 Zero Friction Cycling - https://zerofrictioncycling.com.au
🎬 RELATED VIDEOS
▶ Chain Maintenance 101 - How-To Measure → https://youtu.be/jXnoNeAstNA
▶ T-Type FLATTOP Chains vs Road chains → https://youtu.be/S2HxPyqeRgg
▶ SRAM T-Type FLATTOP Chains - 13-Speed Ready - https://youtu.be/IVBEkTwRTNg
▶ BEST 12 Speed Drivetrain? - SRAM T-Type, Eagle, Shimano → https://youtu.be/G8pnZiSezU8
⏱️ Chapters:
00:00 - Introduction: The Quest for the Perfect Chain Lube
01:05 - Meet Adam from Zero Friction Cycling
02:12 - The Reality of Testing 90,000 KM a Year
04:02 - How ZFC Tests Chain Wear and Contamination Blocks
06:55 - Why Chain Waxing is Crucial for Mountain Bikers
09:12 - Debunking the "Faff" & Myths of Chain Waxing
11:00 - Performance Gaps: Wet Lubes vs. Solid Waxes
13:14 - Road vs. Mountain Bike Wax Adoption Timeline
16:15 - The Link Between Watts (Friction) and Chain Longevity
18:30 - How Liquid Lubes Pump Dirt Inside Your Chain
20:45 - The Truth About Factory Chain Grease
22:38 - Cheap Chains vs. SRAM Hard Chrome Durability
25:20 - 11-Speed & 12-Speed Chain Recommendations (Shimano, SRAM, YBN)
28:40 - The Real Barriers to Entry for First-Time Waxers
31:48 - How to Properly Strip a Chain (Solvents vs. One-Step Cleaners)
34:10 - Silca Chain Stripper vs. CeramicSpeed UFO Drivetrain Clean
36:03 - SRAM Factory Grease: The Ultimate Exception
38:15 - Step-by-Step Chain Rinsing & Drying Protocol
40:02 - Hot Melt vs. Drip Wax (The Hybrid Combo Method)
42:30 - The 4-Minute "Relax and Rewax" Immersive Process
44:50 - The Thermometer Myth: Does Cooling "Lock In" More Wax?
46:52 - Wrap Up & Call for Part 2 Q&A Questions!
💡 Key Takeaways:
• Liquid Sandpaper: Traditional wet lubes look like they're "cleaning" your chain by throwing grime to the outside, but they actually act as a transport medium that pumps grit inside under tens of thousands of PSI, rapidly eating your drivetrain.
• The SRAM Exception: SRAM factory grease is uniquely stubborn. If you're prepping an Eagle or T-Type chain, it requires roughly double the soak time or extra solvent rounds compared to Shimano or KMC.
• The 4-Minute Rule: Immersive waxing doesn't take hours. True physical labor takes about 4 minutes (1 min to remove/mount, 30 sec to swish, 2.5 min to break bonds and reinstall).
• The Hybrid Approach: The most popular method for MTB and gravel is starting with an immersive hot-melt wax, then topping it up with a compatible wax drip lube for the next few rides before resetting it back in the pot.
• Debunking the Thermometer Myth: You don't need to wait for your wax pot to cool down to 65°C to "lock in more wax." High pedaling forces immediately express any excess wax within the first 15 minutes of riding anyway. Take it out hot!
